bloodpressure_ip12

bloodpressure_ip12.omronno

Blood pressure serial number

Type: number

Source: HSE

Interviewer Instruction: RECORD BLOOD PRESSURE EQUIPMENT SERIAL NUMBER: RANGE 001..999

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_omronno (l_indresp_ip) Blood Pressure Serial Number

bloodpressure_ip12.airtemp

Ambient air temperature

Type: number

Source: HSE

Interviewer Instruction: RECORD THE AMBIENT AIR TEMPERATURE. ENTER THE TEMPERATURE IN CENTIGRADES TO ONE DECIMAL PLACE.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_airtemp (l_indresp_ip) Ambient Air Temperature

bloodpressure_ip12.cufsize

Cuff size

Type: choice

Source: HSE

Interviewer Instruction: ASK THE RESPONDENT TO REMOVE OUTER GARMENTS (E.G. JUMPER, CARDIGAN OR JACKET) AND EXPOSE THEIR UPPER ARMS BY ROLLING UP THEIR SLEEVES. IF THE SLEEVE IS TOO TIGHT TO ROLL UP, THE CUFF MAY BE PLACED OVER ONE LAYER OF LIGHT CLOTHING. GET THE RESPONDENT TO SIT IN A COMFORTABLE CHAIR WITH A SUITABLE SUPPORT SO THAT THE RIGHT ARM IS RESTING AT A LEVEL TO BRING THE ELBOW TO APPROXIMATELY HEART LEVEL. SELECT CUFF AND ATTACH TO THE RESPONDENT'S RIGHT ARM IF POSSIBLE. RECORD CUFF SIZE CHOSEN.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_cufsize (l_indresp_ip) Cuff Size

bloodpressure_ip12.bpfeedb

BP feedback

Type: choice

Source: HSE

Interviewer Instruction: OFFER BLOOD PRESSURE RESULTS TO RESPONDENT. 1) SYSTOLIC1 not equal to 999|DK|REF SYSTOLIC: SYSTOLIC1 DIASTOLIC1 not equal to 999|DK|REF DIASTOLIC: DIASTOLIC1 PULSE1 not equal to 999|DK|REF PULSE: PULSE1 >2) SYSTOLIC2 not equal to 999|DK|REF SYSTOLIC: SYSTOLIC2 DIASTOLIC2 not equal to 999|DK|REF DIASTOLIC: DIASTOLIC2 PULSE2 not equal to 999|DK|REF PULSE: PULSE2 3) SYSTOLIC3 not equal to 999|DK|REF SYSTOLIC: SYSTOLIC3 DIASTOLIC3 not equal to 999|DK|REF DIASTOLIC: DIASTOLIC3 PULSE3 not equal to 999|DK|REF PULSE: PULSE3

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)
and if BPFEEDC=1 (Consented to BP feedback)

bloodpressure_ip12.sethtwt

Setup for Height and Weight

Type: choice

Interviewer Instruction: SETUP THE FOLLOWING FOR LATER MEASUREMENT: BMCON = 1|2 STADIOMETER, BMCON = 1|3 WEIGHT SCALE

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if BMCON = 1|2|3 (Has consented to either height or weight)

bloodpressure_ip12.systolic1

First systolic pressure measure

Type: number

Source: UKHLS

Interviewer Instruction: ONCE RESPONDENT HAS SAT STILL FOR 5 MINUTES YOU ARE READY TO TAKE THE MEASUREMENTS. ENSURE THE READY TO MEASURE SYMBOL IS LIT BEFORE PRESSING THE START BUTTON TO START THE MEASUREMENTS. TAKE THE FIRST MEASUREMENT FROM RIGHT ARM (IF POSSIBLE).

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_systolic1 (l_indresp_ip) First Systolic Pressure Measure

bloodpressure_ip12.diastolic1

First diastolic pressure measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_diastolic1 (l_indresp_ip) First Diastolic Pressure Measure

bloodpressure_ip12.pulse1

First pulse measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_pulse1 (l_indresp_ip) First Pulse Measure

bloodpressure_ip12.systolic2

Second systolic pressure measure

Type: number

Source: UKHLS

Interviewer Instruction: WAIT 1 MINUTE UNTIL TAKING NEXT MEASUREMENT. TAKE THE SECOND MEASUREMENT FROM RIGHT ARM (IF POSSIBLE).

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_systolic2 (l_indresp_ip) Second Systolic Pressure Measure

bloodpressure_ip12.systolic3

Third systolic pressure measure

Type: number

Source: UKHLS

Interviewer Instruction: WAIT 1 MINUTE UNTIL TAKING NEXT MEASUREMENT. TAKE THE THIRD MEASUREMENT FROM RIGHT ARM (IF POSSIBLE).

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_systolic3 (l_indresp_ip) Third Systolic Pressure Measure

bloodpressure_ip12.diastolic2

Second diastolic pressure measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_diastolic2 (l_indresp_ip) Second Diastolic Pressure Measure

bloodpressure_ip12.pulse2

Second pulse measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_pulse2 (l_indresp_ip) Second Pulse Measure

bloodpressure_ip12.diastolic3

Third diastolic pressure measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_diastolic3 (l_indresp_ip) Third Diastolic Pressure Measure

bloodpressure_ip12.pulse3

Third pulse measure

Type: number

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_pulse3 (l_indresp_ip) Third Pulse Measure

bloodpressure_ip12.ynobp

Reason no BP reading

Type: choice

Source: HSE

Interviewer Instruction: ENTER REASON FOR NOT RECORDING ANY FULL BP READINGS.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if (SYSTOLIC1 = 999 | DIASTOLIC1 = 999 | PULSE1 = 999) & (SYSTOLIC2 = 999 | DIASTOLIC2 = 999 | PULSE2 = 999) & (SYSTOLIC3 = 999 | DIASTOLIC3 = 999 | PULSE3 = 999) (At least one reading not obtained on all three attempts)

• l_ynobp (l_indresp_ip) Reason No Bp Reading

bloodpressure_ip12.nattbpd

Reason BP not obtained

Type: multichoice

Source: HSE

Interviewer Instruction: RECORD WHY RESPBPS = 2 ONLY TWO MEASUREMENTS WERE TAKEN RESPBPS = 3 ONLY ONE MEASUREMENT WAS TAKEN RESPBPS = 4 MEASUREMENT WAS TRIED BUT NOT SUCCESSFUL RESPBPS = 5 MEASUREMENT WAS NOT TRIED RESPBPS = 6 MEASUREMENT WAS REFUSED. CODE ALL THAT APPLY.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 2|3|4|5|6 (Three successful measures not obtained)

bloodpressure_ip12.othnbp

Other reason BP not obtained

Type: string

Source: HSE

Interviewer Instruction: ENTER FULL DETAILS OF OTHER REASON(S) FOR NOT OBTAINING/ATTEMPTING THREE BLOOD PRESSURE READINGS:

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 2|3|4|5|6 (Three successful measures not obtained)
and if NATBPD = 97 (Other reason not obtained)

• l_othnbp_code (l_indresp_ip) Other reason BP not obtained

bloodpressure_ip12.difbpc

Any problems in BP measures

Type: multichoice

Source: HSE

Interviewer Instruction: RECORD ANY PROBLEMS TAKING READINGS. CODE ALL THAT APPLY.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)

bloodpressure_ip12.othdifbp

Other problems in Blood Pressure measures

Type: string

Source: HSE

Text: RECORD FULL DETAILS OF OTHER PROBLEM(S) TAKING READINGS.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)
and if DIFBPC = 97 (Other difficulty in measuring)

• l_othdifbp_code (l_indresp_ip) Other problems in Blood Pressure measures

bloodpressure_ip12.bpfeedc

BP Feedback consent

Type: choice

Source: UKHLS

Text: Would you like me to tell you your blood pressure results?

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)

• l_bpfeedc (l_indresp_ip) Bp Feedback Consent

bloodpressure_ip12.bpad

Advice feedback on Blood Pressure

Type: choice

Source: HSE

Text: ADVICE TO RESPONDENTS ON BLOOD PRESSURE READING. Your blood pressure is high today. Blood pressure can vary from day to day and throughout the day so that one high reading does not necessarily mean that you suffer from high blood pressure. You are strongly advised to visit your GP within 5 days to have a further blood pressure reading to see whether this is a one-off finding or not. PLEASE REPORT THIS TO THE SURVEY DOCTOR WHEN YOU GET HOME. / Your blood pressure is a bit high today. Blood pressure can vary from day to day and throughout the day so that one high reading does not necessarily mean that you suffer from high blood pressure. You are advised to visit your GP within 2 weeks to have a further blood pressure reading to see whether this is a one-off finding or not. / Your blood pressure is a bit high today. Blood pressure can vary from day to day and throughout the day so that one high reading does not necessarily mean that you suffer from high blood pressure. You are advised to visit your GP within 2 months to have a further blood pressure reading to see whether this is a one-off finding or not. / Your blood pressure is normal today.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)
and if BPRISK <> MIS (Has derived BP risk indicator value)

bloodpressure_ip12.bprisk

Derived BP risk indicator

Type: choice

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)
and if RESPBPS = 1|2|3 (At least one successful measure obtained)

• l_bprisk (l_indresp_ip) Derived Bp Risk Indicator

bloodpressure_ip12.respbp1

Derived variable from BP reading

Type: choice

Source: UKHLS

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_respbp1 (l_indresp_ip) Derived Variable From Bp Reading

bloodpressure_ip12.respbps

Overall BP outcome

Type: choice

Source: HSE

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

• l_respbps (l_indresp_ip) Overall Bp Outcome

bloodpressure_ip12.bpcons

Blood pressure consent

Type: choice

Source: HSE

Text: Before we take those measures We would like to measure your blood pressure. The analysis of blood pressure readings will tell us a lot about the health of the population. Do you agree to have your blood pressure measured?

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)

• l_bpcons (l_indresp_ip) Blood Pressure Consent

bloodpressure_ip12.con30sb

Activity done 30 minutes

Type: multichoice

Source: HSE

Interviewer Instruction: CODE ALL THAT APPLY.

Text: May I just check, have you eaten, smoked, drunk alcohol or done any vigorous exercise in the past 30 minutes?

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)

bloodpressure_ip12.quiett

Time for some quiet

Type: choice

Source: HSE

Text: I am going to leave you to sit quietly now for 5 minutes. During that time I will be taking the air temperature as it is important to understand blood pressure readings/ and I will be setting up equipment to measure your height and weight/height/weight. You should not read and should keep your legs uncrossed.

Universe:
if GRIDVARIABLES.MODETYPE = 1 & (ANNUALEVENTHISTORY.PREGOUT <> 4 & FERTILITYHISTORY.PREGN <> 1) (Mode is face-to-face and respondent is not pregnant)
and if BPCONS = 1 (Has agreed to blood pressure measurement)